10 Tips to check Quality Le Corbusier LC2 Loveseat
Le Corbusier’s LC2 Loveseat brings with it a rich, luxurious character that permeates elegance in any modern living room in which it is situated. The LC2 Loveseat is also known as the “LC2 Two Seater Sofa.” When paired with the LC2 Armchair, the coupled chairs make a grand statement in the traditional or modern home. The wealthy design and inviting stature of the modern pieces also make the LC2 Loveseat and the LC2 Chair a sophisticated furnishing to any executive office, lobby or professional waiting room. When buying a LC2 Loveseat for your modern home or business, follow these ten tips and you’ll be able to distinguish a quality two-seater LC2 Loveseat from a poor replica:
1) The LC2 Loveseat is a steel tubular frame. The frame should be made from a quality high gauge steel (grade 304), and should contain chromium plating for rust protection and a strong shine.
2) The chromium plating on the frame of the LC2 two-seater sofa should hide the joints in the chair. If you can see the joints, then it is a poor quality replica.
3) The tubular steel frame of the LC2 Loveseat forms a small, but noticeable wedge on the arms of the sofa. If there is no indent into the arms of the sofa from the steel frame, and the arms are void of a slight “cushiony” bulge, then the sofa is not a quality replica.
4) The support for the two seat cushions of the LC2 Loveseat should be tight fabric bands, preferably a nylon webbing. Amateur replicas will try to get away with cardboard as a support for the seat cushions.
5) The LC2 Loveseat should be upholstered with high quality aniline leather. Colored fabric is widely available, and can give the sofa a softer, brighter appeal if it is required for the interior design of the home or office; however, the LC2 two-seater sofa is traditionally covered in a 1-1.5mm thick black leather. A full grain leather with a matte finish provides a luxurious executive style, and white leather is an ideal choice for many spacious home interior designs.
6) The two top seat cushions should not be overly firm. The top two cushions will have a slight full-bodied appearance. The LC2 Loveseat should be filled with down feathers or a polyurethane and polyester blend.
7) The arms on the LC2 two-seater sofa are the same measurement as on the LC2 armchair: 5” (12.7cm) across.
8) The LC2 Loveseat is 25.4” (67.05cm) high and around 51.2” (13.04cm) wide. The LC2 Loveseat and the LC2 armchair are both 17” (43.18cm) from the bottom of the chair to the top of the seat cushion.
9) The glides on the bottom of the legs of the sofa are aligned with the edges of the steel, there is no overhang of the glider.
10) The LC2 Loveseat could weigh anywhere from 50 (22.67kg) to 80 lbs.(36.28kg) and will vary depending on the choice of leather and quality of the steel.
Le Corbusier’s LC2 Loveseat is a timeless two-seater sofa that embodies comfort and distinguished luxury within its arms. The LC1 Chair and the LC2 Loveseat will please any modern furniture enthusiast with its modern indulgence of affluent appeal. Following the ten tips listed above will help you distinguish a quality two-seater LC2 Loveseat from substandard versions. You can then be confident that you’ll be resting in the arms of designer sophistication after buying a quality LC2 Loveseat to join your modern furniture collection.
You cannot reproduce, republish or redistribute on any network material from Regencyshop.com
You may, however link to this page from your website or blog.
10 Tips for checking Quality of Le Corbusier LC2 Chair
The LC2 Chair epitomizes the ability of plump cushion comfort to contain itself in a rectilinear modern design with a strong geometric presence. The LC2 Chair by the modern designer Le Corbusier was created back in 1929, yet it wholly represents today’s modern furniture trends. This armchair is classically Bauhaus and International Style, devoid of ornamentation yet striking in design, massive yet minimalist, and most importantly, demonstrates the power of functionality and art in modern furniture design. LC2’s design embraces comfort; and the urge to make oneself comfortable in such a design is hardly restrainable. The LC2 Chair, particularly when combined with the LC2 Loveseat, is a practical and solid addition to any modern home furniture collection, and truly a distinguished furniture addition to any classic or modern office interior design. When buying the LC2 chair, be sure to scrutinize your purchase by following these 10 tips to help you choose a designer chair of the best quality:
1) The wedging of the side cushions by its steel frame is one of the most unique features of the LC2 Chair, and one of the easiest ways to distinguish a quality LC2 Chair from a poorly replicated design. The frame wedging affects the seat comfort, as well as its stability (and, of course, its appearance). The steel frame on poor quality replicas is not wedged far enough into the armchair, and there is no cushion extruding from the frame, rather it looks like a solid rectangle. A frame that is wedged too far into the chair, will provide an excessive puffiness and deter from the armchair’s linear elements.
2) Leather furniture enthusiasts delight in the LC2 chair’s strong leather personality. Anything except quality leather would deter from the chair’s distinguished appeal. An Italian aniline-dyed full grain leather would be of the highest quality. A thickness between 1 – 1.5mm is appropriate. The original LC2 has a matte finish, but soft leather finishes are very popular. Vinyl and lower quality leathers are not acceptable. Fabric upholstery is acceptable and widely available.
3) The seat cushions in the Le Corbusier’s LC2 Chair should not be a square piece of foam padding. A Polyurethane and polyester or down feather provides the comfort that is intended.
4) The top cushion is plumper than the firmer bottom cushion.
5) The arms of the LC2 armchair are 5” (12.7cm) across.
6) The frame should be flawless tubular high gauge steel that is chrome plated for optimal shine. A chromium plating of 25-35 mm is used for rust protection and to hide the joints. In a lower quality stainless steel version, the joints are visible.
7) The frame is also available in a matte or black glossy finish. However, the chrome frame adheres to the designer’s original medium.
8) The LC2 armchair as a width of 30” (76.2cm) facing the front of the chair (from left side to right side), and a width of 27.6” (70.10cm) on the side of the chair (from back to front). The side of the chair from steel frame to steel frame should be 22.4” (56.89cm). The height of the chair is 26.4” (67.05cm), and from the bottom to the top of the seat cushion it is 17” (43.18cm).
9) The bottom support of the seat should be tight strapping, and not cardboard.
10) The chair will weigh around 60 pounds (27.3kg).
The LC2 Chair is one of Le Corbusier’s most distinguished designs. Adding the LC2 chair to your modern furniture collection or your office interior design is sure to carry its distinguishing characters directly into your home of office. When you buy your LC2 chair, make sure you scrutinize the armchair with the above tips in mind to avoid buying an inferior product. You’ll be comfortable in your new LC2 Chair knowing that you bought the highest quality chair for your modern home.
You cannot reproduce, republish or redistribute on any network material from Regencyshop.com
You may, however link to this page from your website or blog.
10 Tips to Finding Quality Characteristics of a Le Corbusier LC3 Sofa
Le Corbusier’s regal LC3 Sofa is a remarkable design that successfully unites the minimalist lines of modern furniture with classically tailored cushions that are brimming with comfort. The clean lines of the thin tubular frame delicately lift the sofa off the floor to employ the use of space, making this sofa a reasonable choice of modern furniture for not-so-large apartments. The timeless classic design of the LC3 make this three-seater sofa the perfect selection for business furniture, either as a modern office furniture addition to the reception area, or as an executive office furnishing for the elite. Modern homeowners will enjoy the luxurious LC3 Sofa as the centerpiece of their modern furniture living room interior design. Before you purchase your LC3 Sofa, be sure to follow these ten tips so that you can be assured that you are buying a LC3 Sofa that has the characteristics of the original design:
1) The LC3 Sofa should have a high gauge steel tubular frame. Just as with the LC2 Chair and LC2 Loveseat, the LC3 tubular frame should have a chromium plating that gives it a glossy shine and provides it with rust protection.
2) If you see the joints in Le Corbusier’s LC3 Sofa, then it is not Le Corbusier’s LC3 Sofa. The chromium plating on the frame hides all the joints which gives the sofa its seamless appearance.
3) The exterior frame of the LC3 is slightly wedged into the arms of the sofa. It is important the sofa is properly wedged within its frame to achieve maximum comfort. There should be a slight bulge where the steel frames wedges into the arms of the sofa.
4) Very poor replicas of the LC3 will use cardboard to support the seat cushions of the sofa. Make sure that the LC3 Sofa has a strong nylon webbing for cushion support.
5) The LC3 sofa is classically displayed with a top quality aniline leather, preferably between 1-1.55mm thick. Custom fabric upholstery is widely available.
6) The cushions in the LC3 are fuller than the cushions in the LC2, and are down wrapped, but they are both filled with a polyurethane and polyester blend or down feathers.
7) The height of the arms and the back support cushions are higher on the LC3 Sofa than they are on the LC2s.
8) The LC3 Sofa is 93.3” (236.98cm) long, and 24.4” (61.97cm) high. A shorter version is available that is 82” (208.28cm) length, 29” (73.66cm) diameter, and 27” (68.58cm) height.
9) There should be nickel-plated steel glides on the feet of the sofa.
10) The LC3 Sofa weighs around 104lbs or more, depending on the size, quality of steel and fabric.
Le Corbusier’s LC3 Sofa is designed for those who crave sophisticated comfort and timeless appeal in their modern home interior design or office furniture. You can be assured that you are buying a quality LC3 sofa for your modern home or office if you review the ten tips listed above to identify the designer characteristics of this modern sofa. This quality permanent addition to your modern home furniture collection will retain considerable distinction, regardless of any temporary changes to your modern home’s interior design, and will provide you and yours with executive style luxurious comfort that will last for generations to come.
You cannot reproduce, republish or redistribute on any network material from Regencyshop.com
You may, however link to this page from your website or blog.
10 Tips to Help Identify a Quality LC1 Le Corbusier Basculant Chair Design
The Basculant Chair, a quintessential piece of modern furniture by the famous architect
Charles Edouard Jeanneret (later changed to “Le Corbusier”), is also more formally known as the Le Corbusier LC1 Chair. The Basculant Chair, or LC1, is artistically and mathematically designed with Le Corbusier’s affinity for the “golden ratio,” a mathematical and architectural concept that promotes proportional harmony in buildings and furniture. Le Corbusier designed his buildings and furniture with the human body in mind, and was astute at designing ergonomically correct furniture, long before “ergonomics” was in the dictionary. Although the Basculant Chair was originally designed in 1928, it’s slim lines and timeless appeal has made this chair a respected addition to any modern home furniture collection. Its professional appearance and ergonomic design makes the Basculant Chair an ideal furniture selection for businesses and modern offices. Its timeless appeal and its ability to use light as a design element, makes Le Corbusier’s Basculant Chair (LC1) a perfect choice for a modern home design that seeks to add comfort while maintaining a continuous visual flow throughout the interior’s design.
When you buy your Basculant Chair, keep these ten tips in mind to help you identify a quality LC1 Chair from poor replicas:
1) The legs and frame of the LC1 Chair are made from forged and welded tubular steel. A cold-drawn steel will provide a stronger durability.
2) The tubular steel of Le Corbusier’s Chair should be high-glossed and chrome plated, preferably to .027mm.
3) The interior bolts should be a strong hexagonal bolt.
4) A rod is attached to the back of the frame. That rod enables the chair to tilt. Part of the ergonomical benefit of the LC1 Chair is due to the conjoining of the frame and the back of the chair with this rod. The tilting ability provides continuous support even while a person is shifting sitting positions in the chair.
5) Some of the original Basculant Chairs had the upholstery mounted on wooden frames, however steel is also common today because of its durability.
6) The Basculant Chair is upholstered in a flat thick quality leather, preferably a full-grain. A 2-3mm thick leather would be a heavier quality, and be welcome in modern rustic or modern western interior designs. The slimness of the design allows for thickness between 1mm and 2mm as perfectly acceptable, and more appropriate, particularly for office furniture and airy modern homes. Inferior leathers are under 1mm in thickness. These will wear faster and crack faster than the thicker leathers. Although browns and blacks are traditional, there are a multitude of colors and textures available today.
7) The straps should also be made of a high quality matching leather.
8) The original 1928 Basculants were 25 1/2 in x 25 ½ in x 25 1/2 in (64.8 cm x 64.8 cm x 64.8 cm). However, there are also designs that are 23 to 25.2 inches in height, 25.6 to 27 inches in back to front width, and around 23.6 inches from front left to front right.
9) The measurement from the floor to the seat should be around 15 – 15.75 inches (40 cm).
10) This chair can weigh anywhere from 25 to 35 pounds, depending on the type of steel and leather used.
Le Corbusier’s Basculant Chair design is a premium example of ancient and modern architectural principles embodied into a sophisticated modern chair design. The Basculant (LC1) Chair is a chair full of historical implications and principled design. Buying quality Basculant Chairs for your modern office or home modern furniture collection will give your interior design a classical sophisticated aura – as well as a comfortable and ergonomically designed chairs of the highest quality. Taking the above ten tips into consideration during your Basculant Chair purchase will protect you from buying an inferior design – and help ensure that Le Corbusier’s design will have a continuous and prominent presence in the interior design of your home’s modern furniture collection.
You cannot reproduce, republish or redistribute on any network material from Regencyshop.com
You may, however link to this page from your website or blog.
